HOME ABOUT US PRODUCTS NEWS TECHNICAL SUPPORT CONTACT US  

Product Center
 Cold material
 Series diamond products
 Series polishing powder
 Series adhesives used in optical technology and product
 Optical coolant（oil）
 Series polyurethane polishing pellets
 Vacuum coating material
 Series cleaning agent
 Adhesives for product assembly
 Series cleaning material
 Series special coating and protective material
 Series optical damp (lubricating) grease
 Adhesives for product assembly
 Optical Instruments
 Adjustable low light level resolution checker WFJ1
 Preset lens for distortion checking WL535j – 5
 Collimator with big field of view BJ – 041B
 Objective T value checker TCY
 Optical instrumentation

 
      LOCATION： HomeProduct CenterSeries special coating and protective materialSealing wax
Name：Sealing wax
Technical parameters：
   This series of sealing was is mainly used for the 
filling of gaps inside or outside optical instrument
 in order to prevent optical instrument from air leakage 
or dust entrance. It has strong adhesion and good 
sealing property at specified temperature. Normal 
sealing wax is divided into inner sealing and outer
 sealing. The softening point of inner sealing wax
 is lower than that of outer sealing wax.
Details：
Specification
 
Product name
H1
H2
B1
B2
Appearance
Black uniform
Black uniform
,Green uniform
Green uniform
（25℃，100g, 1/10mm / minute
15 – 40
41 – 75
30 – 60
61 – 100
Dropping point
>70 ℃
Useful temperature
– 40 – +50 ℃
Note: The color of sealing wax can be selected according to requirement.
 
Usage and precautions
1. Clean the part to be sealed and remove uneven stack.
2. Heat sealing wax to let it melt, apply the wax on the part to be sealed evenly.
3. Air charging test can not be done before the wax hardens.

 
 
Copyright:Yunnan Opto-Electro Auxiliary Material Co.,Ltd
Address:beijing  E-mail:
Phone:0871-68593568  Fax:0871-68590607  Technical Support:NEWFULCRUM