Specification
S.N. |
Item |
Specification |
1 |
Opening flashing point |
>130℃ |
2 |
Motion adhesion (40) |
6.0-10.0(mm2/s) |
3 |
Corrosion |
Not corrosive to steel and copper |
4 |
Others |
No moisture, no water dissolvable acid and alkali, no inorganic impurity |
Usage
It is a lubrication oil that can be used directly without adding other material. When it is used for the first time, check carefully the oil tank and cycling system and make sure that the whole cycling system has no water.
When it is used for a long time, there might be a lot of glass powder deposition. You only thing you need to do is to remove the glass powder (by filtering or after deposition, take only the clean oil) and it is ready for use.
Suggestion
After edge grinding is finished, the optical parts can be cleaned with MBX-01or MBX04-5F cleaning agent.
Suggestion for waste liquid drainage
1、The product can be biodegradated
2、Before wastewater drainage, the solution must be neutralized or become neutral. It
can be neutralized with thin hydrochloric acid or vitriol.
3、Consider local regulations. |